victronups



VICTRONUPS(8)               Network UPS Tools (NUT)              VICTRONUPS(8)




NAME

       victronups - Driver for IMV/Victron UPS unit Match, Match Lite, NetUps


NOTE

       This  man page only documents the hardware-specific features of the the
       victronups driver.  For information about the core driver, see  nutups-
       drv(8).



SUPPORTED HARDWARE

       victronups should recognize all Victron models that use a serial proto-
       col at 1200 bps.  These include Match Lite, Match and the NetUps  line.

       The  Match  Lite  line may only report a handful of variables.  This is
       usually not a bug - they just don’t support anything else.



CABLING

       If your Victron cable is broken or missing, use this diagram to build a
       clone:

       docs/cables/victron.txt



EXTRA ARGUMENTS

       This driver supports the following optional setting in the ups.conf(5):


       modelname=<name>
              Set model name


       usd=delay
              Set delay before shutdown on UPS




BUGS

       The protocol for this UPS is not officially documented.



AUTHOR

       Radek      Benedikt      <benedikt@lphard.cz>,      Daniel      Prynych
       <Daniel.Prynych@hornet.cz



SEE ALSO

   The core driver:
       nutupsdrv(8)


   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/



                                Wed Oct 16 2002                  VICTRONUPS(8)

Man(1) output converted with man2html